Spin Flash Dryers are Used in Various Sectors of the Chemical, Pharmaceutical, and Mining Industries

Spin Flash Drying systems are in which particulate solids are dried during transport in a hot gas stream usually air or combustion gases. The simple Spin Flash Dryer system includes six basic components: the gas heater, the wet material feeder, the drying duct, the separator, exhaust fan, and a dried product collector. The wet particles are fed into the hot gas stream sometimes with special mixing devices. The stream flows up the drying tube. The gas velocity must be greater than the free fall velocity of the largest particle to be dried. The gas velocity in relation to the particle velocity is high. Thermal contact between the conveying air and the solids as mentioned above is usually very short and therefore flash dryers are most suitable for removal of external moisture (surface moisture) and are less suitable for removal of internal moisture. At the end of the drying process a dust separation arrangement is installed.

It must comply with the regulations for pollution control. For this purpose cyclone dust separators, fabric filters, electrostatic precipitators, wet scrubbers, and fabric filters are used. 

This spin flash dryer is useful for mechanical dispersion and for adjusting the granule size of high humidity paste type material.

Under the action of hot air and mechanical dispersion, the wet cake appears granular and gets fluidized. Instantaneous exchange of heat and mass takes place.

The dried materials are taken in the collector as powder products.

The system consists of a double shaft screw followed by mono screw to feed homogenized material into dryer housing at controlled rate.

The tangential entry of air and mechanical action of agitator help to decompose lumps enabling intimate mixing of hot air with the product, and thus ensuring drying of the product.

The particle classification orifice on the top of the drying chamber allows finer products to pass with exhaust gas to the powder collection system.

The industrial spin flash dryer is useful for drying sticky products, also effective against viscous materials.

The simple Flash Dryer is designed to handle materials that can be suspended directly in air, requiring removal of free moisture.

Wet material is dispersed into a stream of heated air (or gas) which conveys it through a drying duct.

Using the heat from the air stream, the material dries as it is conveyed. Drying takes place in a matter of seconds, and the final moisture is generally in the constant rate drying zone.

SVAAR serves in national and international markets. Top Listing Industrial Spin Flash Dryer Manufacturer, Supplier & Exporter from India. Flash Drying systems are in which particulate solids are dried during transport in a hot gas stream usually air or combustion gases. Our experience and highly qualified staff timely delivers a number of products to our clients, the strong base and health growth of the company is testimony to our success in our field, we have equipped ourselves with all modern machinery in our infrastructure. 

Flash dryers are simple in construction and have low capital cost and they are almost trouble free.  Industrial Spin Flash Dryers are used in various sectors of the chemical, pharmaceutical, ceramic, gypsum, wood, and mining industries.

At SVAAR Process Solution, we have successfully installed and commissioned several evaporation plants across India and target to reach globally soon. SVAAR offers customized Spin Flash Dryers with a variety of Configurations.

SVAAR Process Solutions Pvt. Ltd.

Contact us: +919284282341 / +912532469032

Visit us: https://www.svaarprocess.com/products/spin-flash-dryer.html